In stock−10%Piaggio 4T Gaskets
2 products
Gasket sets for four-stroke 50 cc Piaggio, Gilera and Vespa engines. The catalogue holds 2 products from €8.50: an ECO set for the 4V E2 engine from 2008–2019 and a standard set for the air-cooled Zip, Liberty, Fly and LX. We ship from Kaunas to Lithuania, Latvia, Estonia and the EU, usually within 1–2 working days.
Good to know
2V, 3V or 4V heads
Piaggio 50 cc four-strokes come with 2, 3 or 4 valves per head, and the head gasket is different for each. The ECO set here is for the 4V E2 engine, so check the valve count and emission version before ordering. If you are unsure, send us the scooter model and year and we will help you check.
While the engine is open
Replace all the gaskets in the set at the same time, clean both mating faces and check the head for warping. Tighten the head in a cross pattern, then set the valve clearance and change the oil after the first rides if the manual calls for it. Check the joints for leaks once the engine is warm.
Frequently asked questions
Which Piaggio scooters do these gaskets fit?
One set is listed for the 50 cc air-cooled Zip, Liberty, Fly and LX, and the other for the 4V E2 engine of 2008–2019. Match them to your model and year, and write to info@scootershop.lt if the engine code is unclear.
Can I use these gaskets with a bigger cylinder kit?
Only with a standard-bore cylinder. Gaskets are cut to a given bore, so for a bigger kit use the set listed for that kit. For Piaggio kits, see the Piaggio 4T cylinder kit category.
Do I need other gaskets too?
The sets cover the main top-end gaskets. Parts like the exhaust gasket or the intake manifold seal may be separate on some versions, so check the engine's parts list before taking it apart.

