Fast shipping to the Baltics and across the EU

Minarelli 4T Gaskets

1 product

A gasket set for the four-stroke Minarelli 50 cc engine used in MBK and Yamaha scooters. The catalogue holds 1 product from €42.99: the TNT set for the Minarelli 4T. It is meant for a rebuild of the top end, and it ships from Kaunas by parcel locker or courier, usually within 1–2 working days.

Good to know

Is it a four-stroke Minarelli?

The Minarelli 4T has a camshaft, valves and oil in the crankcase, with no separate 2T oil tank. Two-stroke Minarelli engines use different gaskets, so check for an oil dipstick or a filler cap on the engine before you order. If you are not sure, send us your MBK or Yamaha model and year.

When the set is needed

Replace the gaskets whenever the head or cylinder is removed, for example for a valve job, a new piston kit or an oil leak at the joint. Clean the faces carefully and tighten the head nuts in a cross pattern to the torque in the manual. Warm the engine afterwards and check the joint for seepage.

Frequently asked questions

Does this set fit a two-stroke Minarelli?

No. It is for the four-stroke 4T version only. Two-stroke Minarelli engines, horizontal or vertical, use different gaskets, and they are not interchangeable with this set. Check the engine type first.

Which scooters have the Minarelli 4T engine?

It is used in MBK and Yamaha 50 cc four-stroke scooters. Because versions differ, send your model, year and engine number to info@scootershop.lt and we will check that this set is the right one.

Do I need to replace oil seals as well?

Not always. If the engine is only being opened at the head or cylinder, the gasket set is enough. Check seals that you can see worn or leaking and replace those separately.