In stock−10%Body Panel Screws
21 products
Body panel screws and fasteners for scooters: coloured STR8 and TNT kits for Minarelli, Piaggio / Gilera, Yamaha Aerox and Peugeot vertical models, plus universal screws. The catalogue has 21 products from €6.50: chrome, black, blue, red, orange and yellow kits, 4.8 mm diameter screws (4.8×13, 4.8×16, 4.8×19), packs of M6 screws and M6 body panel fasteners. Coloured kits are usually bought together with new body panels to give the scooter a finished look. We ship small fasteners to a parcel locker within 1–2 working days.
Good to know
Model-specific kit or universal
A model-specific kit contains all the screws of different lengths you need, so it is a convenient way to replace all the bodywork fasteners in one go. Universal 4.8 mm and M6 screws are good for replacing individual screws – measure the old screw: the first number is the diameter and the second the length in millimetres.
Do not overtighten
Plastic cracks easily, so tighten screws only enough to stop the part rattling. If a mounting hole has widened and the screw just spins, use an M6 body panel fastener – it fits into the hole and gives the screw a firm hold again. Only use a power screwdriver on its lowest torque setting.
Caring for the coloured finish
To make the coloured finish last longer, use a screwdriver or spanner of the right size – a slipping tool scratches the head. When washing the scooter, do not use harsh wheel cleaners on coloured screws, as they can fade the finish. A damaged screw is worth replacing straight away, before it seizes in its hole.
Frequently asked questions
Does the Minarelli screw kit fit the Aerox?
Minarelli kits are for scooters with a Minarelli engine, but bodywork fastenings vary by model. The Yamaha Aerox has its own TNT screw kit, and before ordering, check the description to see which parts the kit is for.
What size screws do body panels need?
Scooter body panels are often fixed with 4.8 mm diameter or M6 screws, while the length depends on the mounting point. Measure the old screw with callipers and choose one of the same diameter and length.
What should I do if a panel mounting point has broken?
Small cracks can be reinforced with plastic adhesive or a plastic welder, and a widened hole with an M6 fastener. If the whole mounting tab has broken off, replacing the panel is more reliable.
Can you help me choose screws?
Yes – send a photo of the old screw with its dimensions and your scooter model to info@scootershop.lt or call +370 608 07699, and we will suggest a suitable kit or universal screws.




















