Fast shipping to the Baltics and across the EU

Gear Oil

30 products

Gear oils for scooter final drives, moped and motorcycle gearboxes and ATV differentials. Here you'll find 30 products from €4.80: 80W90, 75W90 and 80W140 final drive oils (IPONE Trans 4, IPONE Transcoot, MOTUL Scooter Gear, MOTOREX Scooter Gear Oil), 10W40 and 10W30 gearbox oils (IPONE Box2, MOTUL Transoil, MOTOREX Moto Gear Oil) and AMSOIL ATV/UTV 75W90 for differentials. Scooter oils come in small 130–150 ml packs. Items in stock are sent to a parcel locker within 1–2 working days.

Good to know

Final drive or gearbox

A scooter with a CVT variator has a small reduction gearbox in the rear drive – it usually takes 80W90 or 75W90 gear oil. On mopeds and two-stroke motorcycles with a manual gearbox, the clutch runs in the gearbox oil too, so they need 10W30 or 10W40 oils such as MOTUL Transoil or IPONE Box2. Don't swap one type for the other.

How to change the final drive oil

Put the scooter on its centre stand, undo the filler and drain plugs and let the old oil drain out – it runs out faster when warm after a ride. Replace the drain plug washer, refit the plug and pour the manufacturer's specified amount in through the filler hole. Some scooters have a level plug – oil is added until it starts to run out of it.

ATV differentials

ATV differentials and transmissions work under heavy load, so they often use a 75W90 oil such as AMSOIL 100% Synthetic ATV/UTV Transmission & Differential Fluid, but the exact type is specified by the manufacturer. If you often ride through water, it's worth checking the oil more often – water turns it milky and creates an emulsion.

Frequently asked questions

What oil goes in a scooter's final drive?

Most scooter final drives use 80W90 or 75W90 gear oil, such as MOTUL Scooter Gear 80W90 or MOTOREX Scooter Gear Oil ZX 80W90. You'll find the exact viscosity and quantity in the owner's manual.

Can engine oil be used in the final drive?

Some manufacturers allow it, but most specify 80W90 gear oil for the final drive, as it copes better with the load on the gears. Stick to the type given in the owner's manual and don't mix different oils.

What's the difference between 80W90 and 80W140 oil?

Both flow similarly when cold, but 80W140 is thicker once warm and is used where the gears are under heavier load. 80W90 is enough for a normal scooter final drive; only choose 80W140 if the manufacturer specifies it.

How do I know which oil my moped's gearbox needs?

The gearbox oil type and viscosity are given in the owner's manual – usually it's a 10W30 or 10W40 gear oil. If you don't have the manual, email your moped's model and year to info@scootershop.lt or call +370 608 07699.