In stock−10%Kevlar Drive Belts
20 products
Reinforced Kevlar (aramid) variator belts for tuned and high-mileage scooters. This category has 20 products from €22.00 – Malossi X K and X-Kevlar, Polini Aramid and Maxi Aramid, Stage6 Pro, Motoforce Racing Kevlar and Dayco Kev. There are belts for Minarelli (including horizontal short block and 4T), Piaggio/Gilera, Peugeot, Peugeot 100, QQ 4T and Piaggio Zip 50 3V iGet engines, as well as the MBK Cityliner, Yamaha X-Max 125 and 400–500 cc Aprilia, Gilera, Malaguti and Piaggio scooters. Belts in stock are dispatched within 1–2 working days, or you can collect them yourself in Kaunas.
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
In stock−10%
−10%Belt POLINI MAXI ARAMID, MBK CITYLINER, SKYCRUISER 125 / YAMAHA X-CITY, X-MAX 125 4T
Out of stock
−10%
−10%
−10%Good to know
Why choose Kevlar
Aramid cord barely stretches, so the belt keeps its original length for a long time and the variator works consistently throughout its service life. Such a belt copes better with heat and with the extra torque produced by a performance cylinder or a larger-capacity engine.
Which variator to use it with
The Kevlar belts in this category are stock size, so they suit both standard variators and performance variators designed for a standard-size belt. Overrange or oversize variators need a belt marked accordingly, such as the Malossi X-Kevlar Overrange.
Running in a new belt
A new Kevlar belt is stiffer, so for the first few hundred kilometres avoid hard starts and top speed. During that time the belt's sides bed in against the pulleys and the variator's action becomes smooth. Once it's run in, it's worth checking that the variator works without vibration.
Frequently asked questions
Is a Kevlar belt suitable for a standard scooter?
Yes – it fits in place of the stock belt as long as the dimensions match. On a standard engine you won't notice a difference in power, but the belt will usually last longer.
Can a Kevlar belt damage the variator?
No – a correctly sized Kevlar belt doesn't wear the pulleys any more than a standard one. Faster wear usually points to dirty or damaged pulleys or worn variator rollers.
When should a Kevlar belt be replaced?
Check it the same way as a regular belt – measure the width and look for cracks. Although a Kevlar belt is tougher, it works under a heavier load in a tuned engine, so it's worth inspecting every few thousand kilometres.
How do I know whether a Kevlar belt will fit my scooter?
Choose by the engine given in the name or by your old belt's dimensions. If in doubt, call +370 608 07699 or email info@scootershop.lt with your scooter model and the variator fitted – we'll advise.
