Fast shipping to Lithuania, Latvia, Estonia

Handlebar Switches

24 products

Handlebar switch blocks and individual switches for scooters: lights, indicators, horn, starter and engine kill switch. The category holds 24 products from €1.99 – ECO and TNT products, plus Yamaha Domino OEM, Piaggio OEM and RMS switches. There are blocks for Yamaha, Yamaha Booster 2004–2017 / Slider, Piaggio / Gilera, and the Piaggio Liberty and Vespa ET2, ET4, GT, GTS, LX and S, while the universal switches come in chrome, black and red. Switches you order are dispatched within 1–2 working days, and you can also collect them from our shop in Kaunas.

Good to know

Model-specific or universal

A model-specific block matches the handlebar shape and the original connector exactly, so it fits without rewiring. Universal switches suit projects and modified scooters with a different handlebar – they have to be wired up by function, so you'll need a wiring diagram and connectors.

Handlebar diameter and mounting

Most scooter and moped handlebars are 22 mm in diameter, but only buy a universal block after measuring your own handlebar. Also check whether the block has a locating pin that fits into a hole in the handlebar and stops it rotating. Tighten the block's screws evenly so the plastic housing doesn't crack.

When a switch doesn't work

The usual culprits are oxidised contacts inside the block or a broken wire where the handlebar turns. Take the block apart, clean the contacts with contact cleaner and apply dielectric grease – this often solves the problem without a replacement. If the plastic is cracked or a button is broken, replace the whole block.

Frequently asked questions

How do I connect universal handlebar switches?

Each switch makes or breaks one circuit, so its wires need to be connected to the corresponding scooter wires according to the wiring diagram. Before starting, disconnect the battery and label the old wires so you don't mix them up.

Why doesn't the starter button work?

Often the starter won't engage not because of the button, but because the brake lever isn't pulled – on most scooters the starter only works with the brake applied. If the brake switch is fine, check the button contacts and the starter relay.

Do Yamaha switches fit MBK scooters?

Often yes, as many MBK models are twins of Yamaha ones – the MBK Booster corresponds to the Yamaha BWS, for example, and the MBK Nitro to the Yamaha Aerox. Still, compare the connector and year of manufacture, or check with us.

How do I know whether a switch will fit my scooter?

Compare your old block with the product photo: what matters is the button layout, the connector and how it mounts to the handlebar. If in doubt, email your scooter's model and year to info@scootershop.lt and we'll help you choose.