In stock−10%Brake System
277 products
Brake parts for scooters and mopeds: discs, calipers, brake pads and brake shoes, hydraulic hoses, cables and levers. The catalogue holds 277 products from €3.50, mostly from TNT, ECO and Stage6, plus Malossi, Polini, RMS, Galfer and Vicma. You'll find Stage6 R/T performance discs, including a 280 mm oversize disc for the Yamaha Aerox, Stage6 R/T MK2 calipers in several colours, and standard parts for Piaggio, Gilera, Aprilia, Derbi and Yamaha models. Universal pads and shoes are listed with their dimensions, so they're easy to compare with your old ones. Items in stock are shipped from Kaunas within 1–2 working days.
Good to know
Pads and shoes: when to replace
Replace disc brake pads when the friction material is down to about 2 mm or you hear a metallic squeal. Drum brake shoe dimensions (e.g. 110 × 25 mm) give the drum diameter and the shoe width – choose by these.
Brake gently for the first few kilometres on new pads so they bed in to the disc.
Discs and oversize kits
A brake disc should be replaced once its thickness drops to the minimum stamped on the disc, or when it's warped and you feel pulsing under braking. A larger-diameter (oversize) disc, such as the 280 mm Stage6 R/T, needs a caliper adapter so the caliper sits over the new disc edge.
Hydraulics and brake fluid
Hydraulic systems use brake fluid, usually DOT 4, which absorbs moisture, so it's worth changing roughly every two years. When replacing hoses or a caliper, the system must be bled – otherwise the lever will feel spongy and braking will be weak. Pour fluid from a sealed, recently opened container.
Cables and drum brakes
Drum brakes and their cables need adjusting: a stretched cable increases lever travel and weakens braking. Lubricate the cables and check that they aren't frayed near the ends – replace a damaged cable straight away, as it could snap while braking.
Frequently asked questions
How do I know which brake pads fit my scooter?
The easiest way is by your scooter's model and year, or by caliper type – for example, Brembo-type calipers use pads of their own shape. For universal pads and shoes, compare the dimensions with your old ones; if in doubt, send a photo to info@scootershop.lt.
Can I fit a larger brake disc to an Aerox?
Yes – the Stage6 R/T MK2 280 mm oversize disc is made for the Yamaha Aerox, but it also needs a caliper adapter and sometimes a different caliper. Before fitting, make sure the wheel rim and fork allow a disc of that size.
Why are my brakes squealing?
The most common causes are worn or contaminated pads, an uneven disc, or caliper pistons that no longer retract. Clean the disc with brake cleaner and check pad thickness; if the pads are soaked in oil or grease, replace them.
Will a brake lever fit a different model?
Levers vary by master cylinder and mounting, so choose by model – for example, the Vicma lever for the Yamaha Aerox or the ECO lever for Aprilia, Derbi, Gilera, Piaggio and Vespa models. Check the pivot hole and the lever shape.





























