Fast shipping to Lithuania, Latvia, Estonia

Clutch Bells

33 products

Clutch bells for Minarelli, Piaggio/Gilera, Peugeot and GY6 engines – standard ECO, TNT, RMS and performance Malossi, Stage6, Polini and Naraku. The range covers 33 products from €12.00: the most common 107 mm diameter for 50 cc scooters, 105 mm and 112 mm versions, and a 134 mm bell for the Vespa GTS 125–150. You'll also find Malossi Delta and Fly System sets, in which the bell is sold together with the clutch. Performance bells are often lighter, have cooling fins (such as the Stage6 Wing Cooler) or are CNC-machined. Orders are dispatched from our Kaunas warehouse within 1–2 working days.

Good to know

The diameter must match

The inner diameter of the clutch bell must match the diameter of the clutch shoes – a 107 mm clutch won't work in a 105 mm bell and vice versa. The diameter is given in the product name, and if in doubt, measure the inside of the old bell with a vernier caliper.

The centre hole that the bell fits onto the shaft with matters too – it depends on the engine family, so check the engine listed as well.

Signs of wear

The bell wears on the inside, where the clutch shoes press against it. If the surface shows deep grooves or blue overheating marks, or the bell has gone oval, the scooter vibrates and judders as it pulls away. A bell like this soon wears out a new clutch as well, so the two are usually replaced together.

Light or heavy bell

A lighter bell spins up faster, so the engine gains revs more easily and the scooter responds to the throttle more quickly. A heavier bell acts like a flywheel and delivers drive more smoothly. Some manufacturers, such as Stage6, give the weight right in the name, for example 433 g or 460 g.

Bell and clutch as a set

Malossi Delta and Fly System sets combine the clutch with the bell, so the parts are already matched to each other. This is convenient when the old clutch and bell have worn out at the same time, or when you want to fit a performance rear drive without extra setting up. For Vespa GTS 125–150 owners there's a 134 mm Malossi Delta System set.

Frequently asked questions

How do I know what size clutch bell fits my scooter?

Most 50 cc scooters use a 107 mm bell, but the catalogue also has 105 mm and 112 mm versions for other engines. The exact size is given in the product name – if in doubt, email your model to info@scootershop.lt.

Can a performance bell be used with a standard clutch?

Yes, if the diameter and engine family match. A performance bell will work with a standard clutch, but it gives the most benefit together with a performance clutch and properly chosen springs.

Why does my scooter vibrate when pulling away?

Usually because of a worn or oval clutch bell or unevenly worn clutch shoes. Remove the variator cover and inspect the inner surface of the bell – if it's grooved, the bell needs replacing.

What do "Wing Cooler" or "CNC" mean in a bell's name?

Wing Cooler is a Stage6 bell with external cooling fins that shed heat faster. CNC means the bell has been machined, so it's more precise and often lighter than a pressed one.