Fast shipping to Lithuania, Latvia, Estonia

Scooter Engine Parts

822 products

Internal engine parts for scooters and mopeds – cylinder kits and heads, pistons and rings, crankshafts, gaskets, kick-start parts, engine blocks with gearboxes and engine setup kits. The catalogue holds 822 products from €7.99: ECO, Airsal, TNT, Stage6, Malossi, Polini, Motoforce and Athena. Most parts are for Minarelli vertical, Minarelli AM6, Minarelli horizontal (AC and LC) and Piaggio / Gilera LC engines, with some for the Derbi D50B, Peugeot vertical and Minarelli 50 4T. You'll find standard 50 cc and performance 70–80 cc kits, such as the Malossi MHR, Polini Race Alu or Airsal Racing X-TREM. Orders are packed in Kaunas and dispatched within 1–2 working days.

Good to know

Choosing a cylinder kit

When choosing a cylinder kit, what matters is the engine family, the cooling type (AC or LC) and the gudgeon pin diameter. A standard-size kit is suitable for a repair, while 70–80 cc kits change the engine's character and require the fuel system and transmission to be matched. The cylinder head or its gasket is often replaced along with the cylinder.

Piston and rings

The piston and rings wear fastest, so they can be replaced separately if the cylinder walls are smooth and unscored. Before fitting new rings, check their end gap with them inserted in the cylinder – too large a gap indicates a worn cylinder. On a two-stroke, the ring ends must sit at the locating pegs on the piston.

Crankshaft

Check the crankshaft's condition by moving the con rod up and down: any noticeable play means a worn bearing. Performance crankshafts such as the Malossi MHR RHQ are designed for higher revs and loads, and when fitting one the main bearings and oil seals are replaced too.

Gaskets and setup kits

Gasket sets are chosen by engine and cylinder capacity – for example, the gaskets differ between 50 cc and 70 cc Minarelli cylinders. Engine setup kits bring together parts matched to each other, so they're handy when you want to upgrade the engine in one go.

Frequently asked questions

Can I replace just the piston without the cylinder?

Yes, if the cylinder walls are smooth, unscored and within the permitted wear limit. If you can see deep grooves or damage to the coating in the cylinder, replace the whole kit.

How do I run in a new cylinder?

For the first few hundred kilometres, ride at varying medium revs, avoid long stretches at full speed and use a quality oil. After running in, check the spark plug colour and adjust the jet if necessary.

How do I know whether a cylinder kit will fit my scooter?

Check the engine family, cooling type and gudgeon pin diameter – these are given in the product name. If you're not sure, email your model and year to info@scootershop.lt or call +370 608 07699.

Why does a two-stroke engine lose compression?

Most often because of worn piston rings, a scored cylinder or a leaking cylinder head gasket. Compression can be checked with a compression tester through the spark plug hole.