Fast shipping to Lithuania, Latvia, Estonia

Forks

54 products

Front forks and fork repair parts for scooters and 50 cc motorcycles: complete forks for the Yamaha Booster, Yamaha Aerox and Piaggio Zip, a Derbi Senda fork yoke, dust and oil seals, and steering head bearings. The category holds 54 products from €5.00, including individual fork repair parts. You'll find fork oil in viscosities from 5W to 20W – Motul Fork Oil Expert and Factory Line, Motorex Racing Fork Oil, plus products from IPONE, Athena and AMSOIL. The seal kits are for the Derbi Senda, Aprilia SR, Yamaha TZR, Aerox, BWS and other models, with their dimensions given in the name. You can collect your order from our shop in Kaunas, Mon–Fri 10:30–18:30, Sat 10:30–14:00.

Good to know

Oil seal dimensions

Oil seals are marked with three numbers, e.g. 30/42/10.5: inner diameter, outer diameter and height in millimetres. The inner diameter must exactly match the diameter of the fork tube, which is easy to check with a vernier caliper. The dust seal (dust wiper) keeps dirt out, while the oil seal keeps the oil inside the fork.

Fork oil viscosity

The W rating indicates viscosity: 5W is a thin oil for softer action, 10W is the most common standard choice, and 15W and 20W are for firmer damping, heavier riders or sporty riding. Don't change viscosity at random – it's best to use the viscosity and quantity specified by the scooter manufacturer.

When to replace the oil seals

A ring of oil or an oily film on the fork tube is the first sign that an oil seal is leaking. Replace the seals on both legs at the same time and change the fork oil while you're at it. Before fitting a new seal, inspect the tube: rust spots or scratches will soon damage it again.

Steering head bearings

If you feel a knock when braking with the front brake, or the handlebar seems to "stick" in one position on a straight road, the steering head bearings have probably worn. Replace them as a pair and adjust them correctly – the handlebar should turn freely but without play. Clean and grease the bearing races before fitting.

Frequently asked questions

How do I find out which oil seals fit my forks?

Measure the fork tube diameter or search by model – the seal dimensions are given in the name. If in doubt, email your scooter's model and year to info@scootershop.lt.

How much oil goes into the fork?

The quantity, or the oil level from the top of the tube, is specified by the manufacturer and varies from model to model. Scooter forks need very little oil, so a one-litre pack is usually enough for more than one change.

When should I change the fork oil?

Changing the oil every few years, or whenever you replace the seals, is usually recommended. If the fork has become bouncy and bottoms out quickly under braking, the oil has probably degraded or its level has dropped.

Can I replace my fork with one from another model?

Sometimes, but only if the steering stem length, bearing seats, wheel axle and brake mounting all match. The safest option is to choose a fork for your model and year as given in the name.