Fast shipping to the Baltics and across the EU

Minarelli Vertical

28 products

Cylinder kits for vertical Minarelli engines, as fitted to the Yamaha BWS, MBK Booster and other scooters with an upright cylinder under the seat. The catalogue holds 28 products from €38.00: Polini Alu, Sport and Corsa, MXS Racing (PIN10 and PIN12), Stage6 Sport Pro MKII and Streetrace, Athena Sport Pro, Top Performances Racing, Malossi Sport and MHR Replica 50 cc, DR Evolution, RMS Blue Line and more. Most are 70 cc performance kits, and there are 50 cc kits too. Alongside them you'll find a stud kit and 10 mm piston pin clips. Kits in stock are handed to the carrier within 1–2 working days, or you can collect in Kaunas.

Good to know

PIN10 or PIN12 cylinder

Vertical Minarelli kits are made with 10 and 12 mm piston pins – the MXS Racing 70 cc, for example, comes in both versions, while the Stage6 Streetrace 70 cc is marked PIN10. The pin size must match the crankshaft's conrod, so check it with the old cylinder removed before ordering.

Sport or race 70 cc

The Polini Sport, Malossi Sport or Athena Sport Pro suit everyday riding on a BWS or Booster – they're less sensitive to set-up. Racing kits such as the MXS Racing, Polini Corsa or Top Performances Racing make more power but need precise tuning of the carburettor, exhaust and variator.

Assembly order

Before fitting the cylinder, cover the crankcase opening with a clean cloth so that no clip or dirt can fall in. Always use new piston pin clips, and position their open end away from the cut-out in the piston. Tighten the cylinder nuts in a cross pattern, in several stages, to the specified torque.

Frequently asked questions

Will a Minarelli vertical cylinder fit a horizontal Minarelli?

No, vertical and horizontal Minarelli cylinders differ in mounting and port layout, so they aren't interchangeable. Choose a kit whose name states your engine type.

How do I know which kit will fit my BWS or Booster?

Tell us your scooter's model, year and piston pin size, if you know it. Call +370 608 07699 or email info@scootershop.lt – we'll find the right kit.

Will the stock carburettor work with a 70 cc cylinder?

It will, but it must be re-jetted – fit a bigger main jet and check the needle position. For more powerful kits the stock carburettor becomes too small, so it's often swapped for a larger one.

When should I replace the cylinder kit?

Replace it when compression has dropped, the engine is hard to start when warm, it's losing power, or there are deep score marks on the cylinder wall after a seizure. If the bore is undamaged, replacing just the piston and rings is sometimes enough.