Fast shipping to the Baltics and across the EU

DERBI EURO3 / EURO 4

16 products

Cylinder kits for Derbi D50B engines, fitted from 2006 to the Derbi Senda and GPR, Aprilia RX / SX 50 and Gilera RCR / SMT 50 mopeds (Euro 3 and Euro 4). The catalogue holds 16 products from €44.99: standard 50 cc kits and 70–80 cc performance kits from Airsal, Stage6, Malossi, Polini, MVT, TNT and ECO. For racing there are the Malossi MHR Team and MHR Replica 80 cc, while the Stage6 Sport Pro MK2 or Polini Sport 50 cc suit everyday riding. You can collect your order from our shop in Kaunas, Draugystės g. 19D, or have it sent to a parcel locker – items in stock are shipped within 1–2 working days.

Good to know

How to tell a D50B from a Euro 2

Up to 2006, Derbi mopeds were fitted with the EBE / EBS engine (Euro 2), and after that with the D50B. The engine code is stamped on the crankcase and tells you the generation straight away. The cylinders of these engines aren't interchangeable, so look for Euro 2 kits in the separate "DERBI EURO 2" category.

A gearbox instead of a variator

The Senda, GPR and other models in this group have a manual gearbox, so after a cylinder change the power delivery is tuned with sprockets rather than variator rollers. With a 70–80 cc kit the rear sprocket is often changed, and stronger clutch springs are fitted so the clutch doesn't slip.

Carburettor, exhaust and lubrication

The standard carburettor and exhaust are too small for a performance cylinder, so to unlock its full power you'll usually need a bigger carburettor, a performance exhaust and a different jet.

Also check the oil pump and its lines: a bigger cylinder without enough lubrication seizes quickly.

Race or everyday kit

The Malossi MHR Team and MHR Replica, Stage6 Streetrace and Airsal Tech Racing are built for maximum power and need more frequent maintenance. Cast-iron cylinders such as the MVT Iron Max or Airsal Iron Sport are better suited to everyday riding – they're more forgiving of overheating, and once worn they can be rebored to an oversize.

Frequently asked questions

How do I know if my Derbi has a D50B engine?

What matters most is the year of manufacture and the engine code: from 2006, the Senda, GPR and related Aprilia and Gilera mopeds have the D50B. If in doubt, send the engine number or a photo to info@scootershop.lt – we'll tell you which kit fits.

How does an aluminium cylinder differ from a cast-iron one?

An aluminium cylinder with a special coating (usually Nikasil) is lighter and sheds heat better, which is why it's used in performance kits. A cast-iron cylinder is heavier but tougher and easier to refurbish, so it's more often chosen for everyday use.

Can the Stage6 Sport Pro MK2 50 cc replace the standard cylinder?

Yes, it's a 50 cc kit, so the capacity doesn't change, but the engine gets an aluminium cylinder with performance port timing. It's a good choice when you want to refresh a worn engine without going beyond the factory capacity.

Will a 70 cc cylinder run on the standard carburettor?

It will, but only with a bigger jet and the mixture set up, otherwise the engine may overheat. A larger carburettor and a performance exhaust unlock the cylinder's full potential.